Calculating prices for asphalt repair

Asphalt is a widely used building material that has been used for its versatility and strength for the vast majority of applications, from roads to paving roads. Asphalt has the ability to expand and contract with temperature changes while maintaining its material integrity.

While asphalt is a strong and tough par with other paving materials such as concrete material they can also deteriorate over time. Develop cracks and holes in the asphalt surface and should be repaired as soon as possible. Calculate the cost of asphalt repair is a generally simple task that can be overcome with basic math skills.


  • Measuring the length and width of the holes (in inches) in the asphalt surface using the tape measure.
  • Multiply the length and width measurements (using the calculator) of each hole to find the surface area of ​​the hole (in square inches).
  • Add the surface areas of all holes to find the total area of ​​asphalt repair necessary hole (in square inches).
  • Divide the total area of ​​repair asphalt hole 144. This will convert the measurement to square inches square feet.
  • Measure the total length (in feet) of all the cracks in the asphalt surface using tape. Add all lengths together to find the total amount of asphalt repair is necessary crack.
  • Call a local building supply store to quote the actual cost of asphalt filling both holes and break repair and coverage (by foot or square feet) per container of each product.
  • Dividing the square feet coverage hole filling container asphalt by the total area of ​​holes measured on the asphalt surface. This will calculate the number of containers needed for repair. Repeat this process for repairing the crack of asphalt. Some calculations of container to the nearest whole number, such as asphalt repair products are not sold in partial containers.
  • Multiplies the number of containers of each product for their respective cost to find the total cost of all materials.

Compacting asphalt plate compactor DIY

In road construction, long stretches of asphalt compacted with heavy equipment. For smaller, such as filling potholes and resurfacing roads, asphalt works generally compacted with a machine called a compactor plate or a hand tool called sabotage. Asphalt is compacted to force the aggregate in paving material closer together and flatten the surface. Plate compactors have for use in asphalt compaction plate’s ductile iron.


  • Pala asphalt on the surface to prepare. Place the compressor plate at one end of the asphalt without compacting. Fill the water tank if the plate compactor is equipped with a water tank.
  • Unlock the handle plate compactor according to the instructions of your compressor. This is usually done by pulling a pin. Lower handle to a comfortable position and lock the handle.
  • Start the engine according to the instructions of the compressor. Plate compactors most have a gasoline engine that starts with a cord, similar to a lawnmower engine. Allow the engine to run at low speed for 5 minutes.
  • Open the throttle fully compactor according to the instructions for your compressor. Open the throttle will cause the vibrating compactor.
  • Check the direction of the compactor, but allow the machine to move their own. Steer the machine by pushing the handle to the right to go left and push left to go right.
  • Turn off the compressor, as directed, when the area is fully compacted.

How to place pavers outdoor patio

Patios create a relaxing outdoor space. Materials for patios vary for manufactured natural stone paving. Pavers are installed on prepared sand and gravel base. The cobblestones are laid over the gravel and gaps between the stones are filled with sand to complete the project. Pavers come in a wide variety of designs, allowing owners to find the material that best suits the styles of their homes. Because the pavers are uniform in size, they are an ideal material for the first time do-it-yourselfer to use in a project yard.


  • Measure the dimensions of the courtyard at the selected location.
  • Mark the outline of landscaping patio with spray paint.
  • Dig the patio space at a depth of 6 inches with a shovel. This will create a suitable depth for the foundation.
  • Fill the space of the house with a 4-inch layer of gravel.
  • Shrink gravel plate compactor consistently hitting the gravel with the metal plate at the bottom of the handle throughout the gravel bed. Gravel is fully compacted when the gravel bed is distributed evenly and flat.
  • Roll on gravel landscape sheets. This will allow for drainage and weed crop block. Cut the sheet to fit the space with a knife.
  • Fill the remaining depth of the Foundation with a 2-inch layer of sand.
  • Alisa sand with bow rake to their level.
  • Placing the stones from one side and work your way through the entire courtyard space. The pavers are placed flat and placed in rows. Do not worry that the stones do not fit, and then cracks filled with sand.
  • Place a level on top of each paver then set in place. If the paver is not level, the paver can exploit with a rubber mallet to set until it is level on the sand.
  • Downloading a small pile of sand placed on the cobblestones. Store using a broom; push the sand on all the joints between the pavers to fill the spaces. Sweep any excess sand.


Making a patio brick paver

A brick paver patio enhances a courtyard with a colorful surface to enjoy your outdoor space. Installing brick pavers is a rewarding it-yourself project. Place the pavers on a base of gravel and sand bed and can take as long as needed to properly position and level each paver. With a solid foundation and a flat surface your patio will last for years.


  • Draw a border with landscape painting around the courtyard. Measure the length and width and adjust as necessary as the outline to guide the precise shape of your yard.
  • Use a rope to recreate the shape of the courtyard next to the site. Use this space to dry-lay the pavers in a pleasing pattern. If you’re putting interlocking pavers, follow planned pattern lock up each other instead. Place the brick pavers flush against each other for interlocking pattern and leave no more than an eighth of an inch of space between them if you are following a pattern with joints.
  • Dig 8 inches of soil from the space outlined patio. Use a square tipped shovel to a flat surface on the extension. I digging the soil degree for every 4 feet of the building to drain 1 inch. Surrounded by a compacting machine room and run across the surface to stabilize the soil.
  • Fill the surface with two 3-inch layer of gravel road three-quarter inches. Shrink add gravel after the first layer and then compact it again after adding the second. Gravel road is crushed stone that fits tighten together when compacted, but allows moisture to pass through the Foundation has sufficient drainage.
  • Cover compacted gravel bed with 2 inches of sand to fill the gaps in the gravel and provide for a smooth, level surface brick pavers.
  • Adjust to the cobblestones in the order that you have set off the patio. Add or remove some of the sand until the bricks are even with each other.
  • Fill the joints between pavers with stone dust or fine-grained sand. Cobbles together stuffed pad and keep stable.

How to build a cobblestone courtyard

When you decide to build a playground in the yard or garden, you have many choices of design and materials to choose from. To create a traditional, rustic courtyard space, you may consider building its cobbled courtyard. You can buy or collect cobblestone paving stones used an old path, patio or walkway to create a truly rustic element of the exterior of your home. To maintain the authenticity of the paved courtyard, you should dry-set stones, which also helps to shorten the installation time.


  • Excavate an area to the cobblestone courtyard. Use a shovel to remove the grass and another two inches of soil in the area, digging to a total depth of three to five inches. Place the turf and soil in a wheelbarrow for easy transport to another location.
  • Inspect the area with a level to determine the high and low points of the excavation site. The sword more land at high points. Continue to check the area until you have a perfectly level site in the overall length and width required for your patio.
  • Shrink land within the site to create a firm foundation for the basis cobblestone courtyard. To do this, repeatedly you must pound the wide end, plane sabotage manual floor against the ground until no longer compresses the ground under your feet.
  • Apply a layer of two inches of crushed stone for the site of the yard. Smooth stone and use the level to create a layer of stone perfectly level. Once level, land use tamper to compact the crushed stone in the same method described above, stopping only when the earth stops giving her weight.
  • Start Installation cobbles cobblestone courtyard at the site. If you install a rectangular or square courtyard, you can start at one corner, but for circular or oval courtyards may want to start in the middle of the enclosure of the courtyard. To set the paver in place, simply place the paver on the layer of crushed stone. Set the level above the paver and use a rubber mallet to hit different areas of the paver to the pavers is perfectly level.
  • Repeat this process of leveling every cobblestone paver place. Work out the paver of the first, in all directions. Leave spaces between the stones measuring between one quarter inch and one-half inch.
  • Apply masonry sand in the gaps between the pavers. Wait until after you have installed the cobblestones and then dump the sand in the center of the enclosure of the courtyard. Use a broom straw or ordinary nylon or hand to sweep the sand into the gaps.